Getting the right measurements is the difference between a door that glides and one that sticks. Here's the simple way to do it.
Width: Measure the opening at the top, middle, and bottom. Use the minimum measurement. That's your door width.
Height: Measure the left, middle, and right side. Again, use the minimum measurement.
Check plumb and level: Put a level on the side jambs and the header. If it's off, fix it before you install. A crooked opening means a crooked door.
Clearance: You need a few inches on each side for the hardware and for the door to slide. Top clearance for the track and hangers. Bottom clearance about 1/2 to 3/4 inch so the door doesn't rub the floor.
Door thickness: Make sure your opening can fit the door you picked. Measure it.
If you're doing a bypass setup-two doors that slide past each other-you'll measure differently. Check our Bypass Barn Door Hardware Kit for that.
For a dining room divider, a sliding hanging room divider works great. See our Sliding Hanging Room Dividers for Dining Room.
Need specific hardware? Our 48 Barn Door Hardware has options.
Measure twice, install once. If you have questions, reach out. We'll help you get it right.
