Install stainless steel shower room hardware Step 3：Install shower room frame.
1.Put stainless steel shower door hardware in the right place and mark it. There is an important note here: you should consider the glass size, because it will cause the installation to fail.
2.Using an electric drill to drill on your mark.If you was installed the tiles on the wall, drill holes carefully to prevent the tiles break. You also can spraying water on the wall when drilling, it can give tiles cool to avoid the tiles from breaking.
3. Install the shower room frame, use a hammer to drive in the rubber particles, and then use screws to tighten the shower room frame and fix it with screws.
Install stainless steel shower room hardware Step 4：inlay and fix the glass.
1. Embed the glass in the U-shaped groove of the base, and then lock the glass to the hole of the bottom basin and fix it with screws.
2. Find the correct position to drill the hole above the glass, install a fixed base and connect the round tube, and fix it to the top of the glass with a curved tube sleeve. The U-shaped groove fixes the glass, and the tempered glass is clamped on the aluminum alloy frame.
