Surface treatment: sanding (wire drawing) and mirror light (Liang Guang).
Fine surface: Fineness can achieve no cracks, no scratches, no cape, no sand holes, no pores, bright precision
The scope of application: glass door, wooden door, hanging door, aluminum door, stainless steel door, screen, partition, passage
Uses hotels, restaurants, shopping malls, stores, home furnishings, hotels, offices, residential areas, gardens, garages, beauty salons, government units, etc.
Packaging: Individual packing (pearl cotton bag + white box) + outer box packing + packing belt or EVA package packing + outer box + packing belt (can provide packing information, also can according to customer requirements, help customers affix the mark and side mark
The supporting products of the crane include crane, pipe clamp, stopper, stopper, pipe wall cover or plug, handle or handle lock, fixture or connector.
PRODUCT INTRODUCTION
Model: TD908017C
barn door hardware for two doors
Loadable: 200kg
Suitable for wooden door thickness: greater than or equal to 30mm
Applicable circular track: 25mm (customizable o 19mm)
Main material:
1. American Standard 304 stainless steel (containing 8 nickel and 18 chromium, all kinds of elements up to standard) environmental protection low carbon material: long use time, little harm to the body; with excellent corrosion resistance, its products do not need to coat protective layer, also do not need to use chemicals; long service life of stainless steel, do not need frequent repair and replacement.
2. POM solid rings imported from New Zealand: the outer rings of our bearings are black wheels machined by POM bars. POM is known as "super steel" or "steel racing". It has high density, high mechanical strength, and rigidity. Wear resistant and lubricate. It has a strong impact on recovery, good environmental resistance, and good organic solvent resistance. Because of the high density of our solid rod, in the subsequent use process will be more smooth, more smooth use.
3. NSK bearings imported from Japan: bearings are durable and can be rotated up to 300,000 times after testing; we placed two bearings on one wheel, greatly improving the stability and bearing strength of the crane, and our bearings have been rust-proof treatment, under the salt spray test 100 hours without rust.
Quantity of products
![]() |
barn door equipment |
| 1 x Round tube | |
|
2 x pulley |
|
| 4 x Tube Holders | |
|
2 x Door Stopper |
|
| 2 x Endpiece | |
| 1 x Floor Guide |






What is the difference between our pulleys?

The pulley is the most important part of the entire sliding door. The quality of the pulley is especially important, which plays a key role in the life of the sliding door. Are you worried about the mixed market?
Spline Hardware is a 25-year manufacturer specializing in the production of stainless steel pulleys. Let us talk about the difference between the pulleys of the spline hardware and the pulleys on the market.
(1) The main material of our pulley is American Standard 304 stainless steel.
It is worth noting that not all 304 stainless sheets of steel are the same, they are divided into national and American standards.
And what is the difference between American Standard 304 stainless steel and GB 304 stainless steel?
The key is to look at these three elements: nickel, carbon, chromium
1. Nickel, the main function of this element is rust prevention, the national standard is 7.5%-7.8%, and most of the domestic market is 7.5%, and we guarantee that the standard of 8% or more per ton of material is About 3,000 yuan, this element American standard anti-rust is twice as long as the national standard anti-rust.
2, carbon, this element mainly shows the material purity, the national standard is below 0.12%, the conventional American standard is below 0.08%, and our material is made of 0.06% stainless steel to reach the carbon content of 0.06% or less. High carbon content and easier to rust.
3, chrome, this element mainly affects the hardness of the material. The American standard 304 stainless steel on the market is mostly 15-16%, and our content is above 17-18%.
(2) Bearings: Most of the products in the market use pure iron bearings, the price is cheap, not wearable, the price is only between a few cents and 2 dollars, and the pulley bearing of the spline hardware is selected from the NSK bearing imported from Japan, the price is high. The minimum is 12 pieces! We installed two NSK bearings on one pulley to ensure the load-bearing and sliding of the pulleys. NSK bearings are made of magnetic special bearing steel with a hardness of 70 degrees. The overall cover design is waterproof and durable, and the sliding door test can be back and forth at least 300,000 times.
(3) Pulley rubber wheel-- an outer ring of bearing:
The cheap pulleys on the market are made of recycled materials, plastic injections, and many impurities.
The spline hardware is strictly selected from New Zealand imported POM solid bar, which is cast by 500 tons of pressure and processed by solid rods.
POM is a crystalline plastic with a density of 1.42g/cm3, high density, self-contained oiliness and strong resistance to repeated impact. To this end, we specially designed a test system to make 100,000 times back and forth with a pulley load of up to 200KG.
Let's see what our stainless steel pulleys have become after 100,000 times.
On the left is the new pulley of the spline hardware, and on the right is the pulley that has passed the 100,000th limit challenge. It can be seen that the surface of the pulley has no obvious wear, but it is more bright and smooth because of its high density and oiliness.

Hot Tags: barn door hardware for two doors, manufacturers, suppliers, wholesale, factory, made in China, stainless steel barn door back mount barn door hardware, stainless barn slider mount barn hardware, stainless barn connector mount barn hardware, stainless barn link mount barn hardware, stainless steel barn door lock mount barn door hardware, stainless steel barn closer mount barn hardware


